|
 |
|
|
| |
 |
|
 |
 |
Champion 20 STEAM |
 |
| |
Specification Compliance |
IS-2712 - 1998
IS-2712 - 1979 Grade W / 3
IS 2712 - 1971 Grade C |
|
Compressed fibre jointing is a consistently uniform pliable and resilient product. A price worthy quality of dependable performance, plus adaptability to many sealing requirements makes this 'STEAM JOINTING' the most popular choice sheet packing of plant engineers and maintenance men.
RED or GRAPHITED
Metallic and Non-Metallic in both finishes.
Developed for general purpose applications and this quality is applicable to a wide range of duties with less severe working conditions of temperature and pressure. |
|
Recommended Max Temperature |
380oC |
|
Recommended Max Pressure Kg./cm2 |
35 Kg / cm2 |
|
|
|
|
Champion 20 METALIC |
|
| |
|
A compressed Asbestos fibre jointing embedded with a wire gauze insertion supplied with Graphite Finish. Used for general purpose application where condtions of temperature and pressure are not too severe.
GRAPHITED BLACK |
|
Recommended Max Temperature |
415oC |
|
Recommended Max Pressure Kg./cm2 |
40 Kg / cm. |
|
|
|
|
|
Champion 54 SUPER |
|
| |
Specification Compliance |
IS-2712 - 1998
IS-2712 - 1979 Grade W / 1
IS 2712 - 1971 Grade A / S
IBS 2815 - 1973 Grade A |
|
Manfactured from excellent quality of Chrysotile Asbestos Fibre and raw materials, the blend being intimately mixed with heat resisting rubber compounds under special process to ensure maximum stability against high pressure and temperatures.
Though primarily a super heated steam jointing it is also recommended against saturated steam, oxygen, petroleum distillates, oils and fats, fuels, internal combustion engines, hydrocarbons, alcohols, solvent, dyes, etc. It is popularly used in MARINE ENGINES, electricity generating sets etc.
YELLOW / GREY or GRAPHITED |
|
Recommended Max Temperature |
550oC |
|
Recommended Max Pressure Kg./cm2 |
150 Kg / cm2 |
|
|
|
|
Champion 54 SUPER METALIC |
|
| |
|
A compressed Asbestos fibre jointing embedded with a wire gauze, The super metallic sheet is superior in performance over other forms of jointing sheets where severe physical conditions of high pressure and temperature have to be resisted. It is effectively used under rapidly changing operating conditions of pressure, were vibrations are experienced and where the flange of gasket joint is narrow.
Used in diesel exhaust manifold, cylinder head gaskets, internal combustion engines, air compressors.
GRAPHITED BLACK |
|
Recommended Max Temperature |
600oC |
|
Recommended Max Pressure Kg./cm2 |
160 Kg / cm2 |
|
|
|
|
|
Champion 39 HIGH PRESSURE |
|
| |
Specification Compliance |
(Indian IS 2712 - 1998 Grade 0/2), (IS 2712 - 1979 Grade W/2), (IS 2712 - 1971 Gradw B/S) |
|
Manufactured from selected quality of Asbestos Fibre and vulcanized with special rubber compound to meet with the exacting requirements of modern industry. Used for applications against dry and wet steam, water, gases, alkies, oil at normal temperatures, chemicals, fuels etc. and general engineering.
BROWN / GREY or GRAPHITED |
|
Recommended Max Temperature |
440oC |
|
Recommended Max Pressure |
80 Kg / sq.cm |
|
|
|
|
|
Champion 39 HIGH PRESSURE |
|
| |
Specification Compliance |
IS-2712 - 1998
IS-2712 - 1979 Grade O / 1
IS 2712 - 1971 Grade A / O
British BS 1832 - 1972 |
|
A compressed fibre jointing bonded with a sophisticated compound. This is specialised jointing to withstand the most exacting demands of oil and petrochemicals plants, solvents, refrigerators, oils, etc.
Used in pipelines and apparatus of petrochemical fields, petroleum distillates, oil and petroleum industries. It is also recommended in industrial processes with high contents of aromatic substances, sulphurous compounds, chloric hydrocarbons, phenols, refrigerants, etc. The jointings give satisfactory services against steam also.
DARK GREY |
|
Recommended Max Temperature |
210oC |
|
Recommended Max Pressure Kg./cm2 |
150 Kg / cm2 |
|
|
|
|
Champion 60 ACID |
|
| |
Specification Compliance |
IS-2712 - 1998
IS-2712 - 1979 Grade A / 1 |
|
This is a specialised asbestos fibre jointing sheet which is intimately bonded with an acid resisting compound to withstand the corrosive action of acids and chemcials.
Recommended for use against hot concentrated organic, inorganic and mineral acids inculding hydrochloric, sulphuric (oleum) and nitric acids, under service conditions of temperature and pressure commonly encountered in chemical industries.
CREAM / LIGHT GREY |
|
Recommended Max Temperature |
210oC |
|
Recommended Max Pressure Kg./cm2 |
150 Kg / cm2 |
|
|
|
|
|
Non Asbestos Joining Sheet
|
|
|
|
|
AF 111 |
|
| |
|
A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers.
Colour : Red & Green
General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions). |
|
Max. Short term service temp. |
400oC |
Max. Continuous service temp. |
250oC |
Max. Operation temp. for steam |
180oC |
|
|
|
|
AF 120 |
|
| |
|
A compressed synthetic Aramid fibre joining sheet bonded with elastomers to create a matrix of stability.
Colour : Green
Also available with wire gauze reinforcement and antistick coating.
Suitable for light industrial applications. |
|
Max. Operating Pressure |
50 bars |
Max. Short term service temp. |
400oC |
Max. Continuous service temp. |
250oC |
Max. Operation temp. for steam |
180oC |
|
|
|
|
AF 139 |
|
| |
|
A high quality joining sheet based on synthetic Aramid fibres bonded with NBR elastomer.
Colour : Orange
Also available with wire gauze reinforcement and antistick coating.
Suitable for use in applications involving hydrocarbons such as oils and solvents, steam, glycols and aqueous solutions. |
|
Max. Operating Pressure |
80 bars |
Max. Short term service temp. |
400oC |
Max. Continuous service temp. |
250oC |
Max. Operation temp. for steam |
200oC |
|
|
|
|
AF 154 |
|
| |
|
A superior performance compressed joining sheet incorporating a blend of special heat resisting Aramid fibers with a high quality nitrile elastomer binder.
Colour : Yellow
Also available with wire gauze reinforcement and antistick coating.
Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acid & alkalies. |
|
Max. Operating Pressure |
150 bars |
Max. Short term service temp. |
400oC |
Max. Continuous service temp. |
250oC |
Max. Operation temp. for steam |
290oC |
|
|
|
|
AF 159 |
|
| |
|
A Premium grade joining sheet based on special synthetic Aramid fibres bonded with nitrile elastomer.
Colour : Grey
Also available with wire gauze reinforcement and antistick coating.
A universal grade suitable for many industrial sealing applications. |
|
Max. Operating Pressure |
150 bars |
Max. Short term service temp. |
400oC |
Max. Continuous service temp. |
250oC |
Max. Operation temp. for steam |
250oC |
|
|
|
|
AF 160 |
|
| |
|
A top quality acid resistant compressed synthetic Aramid fibre joining sheet bonded with special binders.
Colour : Cream
Available with antistick coating.
Acid resistant grade. Recommended for use against hot, Concentrated Organic/inorganic.mineral acids. |
|
Max. Operating Pressure |
150 bars |
Max. Short term service temp. |
250oC |
Max. Continuous service temp. |
210oC |
Max. Operation temp. for steam |
210oC |
|
|
|
|
Asbestos & Non Asbestos Packing
|
|
|
|
|
|
|
|
| |
Temperature
Centigrade |
Service Recommendation |
350°C |
Asbestos Yarn (Metallic / Non-Metallic) :
A vital raw material made with Metallic wires such as Zinc, Brass & Copper for the manufacturer of Automobile Clutch Facings. For heart insulation of small pipes, electric cables, sealing joints in flexible metallic tubings. For steam Hoses, Packings in patent Glazing, Steam Valves, Water Cocks etc.
Sizes : 1.5mm to 6mm in Spool : 0.5 to 1 kg. |
|
350°C |
Asbestos Cloth (Metallic / Non-Metallic) :
Asbetos Cloth is manufactured in range like open weave to close textures in metallic and non-metallic depending on requirements & usage of Industries, are used in Boilers, Pipelines, in Station Ships for Thermal Insulations, Boiler mattresses for protective clothing and fire protection, gloves, suits, blankets, aprons, safety curtains and many more purposes. Approximate width 42"
Sizes : 1.5mm to 6mm 50/55kgs approx. |
|
350°C |
Asbestos Woven Tape (Metallic / Non-Metallic) :
Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater. Available in Metallic and non-Metallic width : 12.5mm to 150mm.
Thickness : 1.5mm to 6mm in 60mtr.coil. |
|
175°C |
Asbestos Rubber Proofed Cloth/Tape/Gaskets (Metallic / Non-Metallic) :
Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater. Available in Metallic and non-Metallic width : 12.5mm to 150mm.
Thickness : 1.5mm to 6mm in 60mtr.coil. |
|
350°C |
Asbestos white Rope (Metallic / Non-Metallic) :
Asbestos Dry plaited general steam and insulation packing for hot gases. Oven autoclaves etc. |
|
325°C |
Asbestos Gland Packings (Metallic / Non-Metallic) :
Lubricated and Graphited asbestos Gland packing for reciprocating & rotary pumps, medium pressure conditions. |
|
|
|
|
| |
Properties |
GFG Products |
Asbestos Products |
| Service Temp. |
Upto 550° |
Upto 300° |
| Thermal Conductivity |
Lower 0.0821 Kcal/m H°C at 300°C |
Higher 0.1047 Kcal/m H°C at 300°C |
| Combustibility |
Remains ductile upto 550°C |
Fuses at 300°C |
Strength :
|
|
|
| Wrap |
|
|
| Fill |
|
|
| Health Hezard |
No |
Yes |
| Density |
Lower |
Higher |
| Flexibility |
Higher |
Lower |
| Abrasion Resistance |
296 cycles |
199 cycles |
| Inorganic |
No |
Yes |
| Reusability |
Yes |
No |
| Fabric Weight (3mm) |
1600 gsm |
2300 gsm |
|
|
|
|
|
|
|
